Home
AT&T UM
Cams of Interest
Current events
Vacations
My B-24 Flight
A Cessna 182 Ride
Another Cessna Ride
John Deere Tribute
Remodel Projects

AAAI Work
Exchange Server
Supported Websites
Work Sites
New Computer Rack

Instructions
Operating the SPA
Pool Filter Cleaning


Spa Usage Instructions For Our Adult Kids

It will take anywhere from 30 to 45 minutes to heat up, depending on the starting water temperature.

Perform the steps in reverse when you're done with the SPA. You need to do this so that the pool automatically runs property and that you're not running the heater all day trying to heat the pool.

Also, VERY IMPORTANT. When you're done using the spa, be sure to remove the plug between the pool & the spa that you inserted in step No: 2. Not doing so, the next time the pumps run automatically, it will pump the spa dry and possibly burn up the booster pump up.

(click on any image to enlarge)

Also, please remember pool safety. Always be ever vigilant. Thanks.
 

1- Locate plug hanging from the bell

2- Insert plug from the pool side and tighten clock-wise until snug

3- Shut off the solar heater. See step no: 4

4- Move the switch on the left from Auto to off.

5- Open up the left electrical box and turn on the main pump (if not already running)

6- Overall view of the pump area

7- Move the drain valve SLOWLY to point towards "SPA" as indicated

8- Turn this valve clock-wise until just snug. Do not over-tighten

9- Move jet valve SLOWLY to point towards "SPA" as indicated

10- Flip on the heater switch on the left. It will start automatically in a few seconds. You shouldn't really need to change the temp setting now

11- In an emergency, you can flip this switch off to shut down everything. (it's painted RED now)

12- Sometimes we put folded towels over these 2 vents to quite things down if you like